Ipac Menu Options; Bluetooth - Ametek iPac User Manual

Instrument Setup

iPac Menu Options

Bluetooth

Enable the following options by pressing (
Control button. The status indicators on the iPac
indicate the following:
• Green - The Bluetooth function is ON.
• Gray - The Bluetooth function is OFF.
• Yellow - The iPac is enabling the Bluetooth function.
Note: If you are not using the Bluetooth feature, turn this option OFF. This will extend
the battery life of the iPac.
Search
To perform a search for Bluetooth printing devices, perform the
following:
1. Press ( ) the Control button and the iPac searches the
local area for Bluetooth devices.
2. When the iPac is searching for a Bluetooth device the
Bluetooth icon will blink. After the icon stops blinking, the iPac
has completed its search and displays the available devices.
3. Highlight the Bluetooth device using the UP or DOWN icon
and press (
start blinking. After it stops blinking the iPac will display if the
Bluetooth device is connected.
Note: When the Bluetooth is connected a message is displayed
"Bluetooth Connected." If the connection was unsuccessful
then a message is displayed indicating
"Bluetooth Connection Failed."
4. If the connection was unsuccessful, ensure that the printer has power to it and
then repeat the Bluetooth connection process.
Note: When a connection is made to a Bluetooth printer, the connection information
is stored in the iPac. Whenever Bluetooth is turned on and no other
connection has been made, the iPac will attempt to reconnect to the same
printer.
16040-101 Rev. J
(continued)
) the Control button. The Bluetooth icon will
) the
Green
Gray
17