Change Password - Xerox DocuColor 40 User Manual

2
2-46 Performing Setup from the Control Panel

Change Password

Clear Server
Setup
Remove Calibration
Choose Remove Calibration when you wish to return the copier to its default state.
You do not need to remove a calibration before applying a new calibration.
This affects all users. Continue?
Yes/No [Yes]
This option is a reminder that calibration is a global setting; if you remove calibration,
every print job is affected by your action.
If you choose , the current calibration is removed and you return to the main Cali-
Yes
bration screen. If you are finished, choose
reboots.
If you choose No , the calibration is not removed, but you still return to the main Cali-
bration screen.
Exit Calibration
When you choose
Exit Calibration
Change Password
Change Password enables you to set or change the Administrator password for the
DocuColor 40 CP. This password determines whether a user can modify the Setup
options. See page xv for information on Administrator access privileges.
When the DocuColor 40 CP is installed, there is no password. If you do not create an
Administrator password, users are not required to enter a password to modify the
Setup. If an Administrator password has been set previously, you are required to enter
it when you run Setup. Use the up and down button to select the characters and the
left and right arrow buttons to move between them (see page 2-7).
Scroll to the third screen of the main Setup menu and choose
Enter and confirm the password as described below.
. The DocuColor 40 CP
Exit Calibration
, the DocuColor 40 CP reboots.
.
Change Password