Xerox DocuColor 40 User Manual page 62

2
2-26 Performing Setup from the Control Panel
In each subsequent browse screen, the top line represents your current location. The
second line contains:
• A list of objects in the current container directly below your current location
• The symbol "
With an object selected, choose
tree. When you select an object and choose
line, and the second line lists objects directly below it.
Continue to browse the NDS tree until the User Login object is displayed in the sec-
ond line. Choose
Enter Password
Enter the login password for the NDS tree, using the up and down buttons to select
characters, and the left and right arrow buttons to move the cursor. Choose
Navigate the NDS
tree to the Print
Server.
Press to browse the NDS tree to the Print Server object.
OK
Browsing to find the Print Server object begins with the NDS tree that you selected
previously (with
sents your current location. The second line contains:
• A list of objects in the current container directly below your current location
• The symbol "
With a container object selected, choose
go up the tree. When you select an object and choose
on the top line, and the second line lists objects directly below it.
When the Print Server is displayed in the second line, choose
Enter Print Server
Password
Enter the Print Server password, using the up and down buttons to enter characters,
and the left and right arrow buttons to move the cursor. Choose
required, choose
" to go up one level.
..
OK to travel down the tree, or choose "
.
OK
). In each subsequent browse screen, the top line repre-
Select NDS Tree
.. " to go up one level.
OK
.)
OK
OK , that object is then displayed on the top
to travel down the tree, or choose "
, that object is then displayed
OK
.
OK
OK . (If no password is
.. " to go up the
OK .
" to
..