Xerox DocuColor 40 User Manual page 50

2
2-14 Performing Setup from the Control Panel
Network Setup
Port Setup
Source Routing
Request All Route
Yes/No [Yes]
This option appears only if you enabled Source Routing. Select
Request packet to travel to its destination by all routes.
Source Routing
Respond All Route
Yes/No [No]
This option appears only if you answered
want the Response packet to return by all routes to the originating computer.
Parallel Port Setup options
You must enable the parallel port in order to enter the Parallel Port Setup options and
print to the parallel port.
Parallel Port Setup
Enable Parallel Port
No/Yes [No]
Select if you want to print through the parallel port. You can connect a single
Yes
PC-compatible computer to the parallel port and print directly to the
DocuColor 40 CP.
Enabling the parallel port does not conflict with using Ethernet or Token
N :
OTE
Ring communication with the DocuColor 40 CP.
Port Timeout in Seconds
5-60 [5]
This option appears only if
how long the DocuColor 40 CP waits without receiving data from the parallel port
before deciding that the current job is complete. Until the timeout, the
DocuColor 40 CP cannot receive new jobs through the parallel port, but it can con-
tinue to receive network print jobs.
to the previous option. Select
No
is set to
Enable Parallel Port
if you want the
Yes
if you
Yes
. Your setting determines
Yes