Network Setup Options - Xerox DocuColor 40 User Manual

2
2-10 Performing Setup from the Control Panel
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Exit Network Setup
Port Setup
Protocol Setup
Service Setup
Network Setup
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select
main Setup menu without making any changes.

Network Setup options

Network Setup configures the DocuColor 40 CP to receive print jobs over the network
systems that will be used at your site.
In the Setup menu, choose Network Setup.
The Network Setup menu includes three submenus that let you choose port types,
protocols, and network services. You must perform Port Setup and enable at least one
port.
For each item you enable, you are prompted to enter settings for that item. Default
values, where applicable, appear in square brackets in this chapter.
In Network Setup you specify network addresses and names to be used by
workstations, servers, and the DocuColor 40 CP when they communicate with each
other.
You need to display and select options only for the network systems that are currently
used at your site. If your network requirements change, you can change Network
Setup at any time.
If the DocuColor 40 CP is configured to enable more than one protocol, it automati-
cally switches to the correct protocol when it receives a print job. When the parallel
port and one or two network ports are enabled, print jobs can be received over all of
those ports at the same time.
No to return to the