Xerox DocuColor 40 User Manual page 58

2
2-22 Performing Setup from the Control Panel
Network Setup
Service Setup
LPD Setup
Network Setup
Service Setup
Windows Setup
LPD Setup options
Enable LPD
Yes/No [Yes]
Select to allow lpd printing. See "Setting up the DocuColor 40 CP on TCP/IP
Yes
networks" on page 4-26 for more information.
Windows Setup options
Enable Windows Printing
Yes/No [No]
Enabling Windows Printing enables SMB (Server Message Block), the built-in file
and printer sharing protocol built into Windows. Enabling SMB allows the
DocuColor 40 CP to be listed on the network so that Windows clients can print to
a particular print connection (Hold, Print, or Direct) on the DocuColor 40 CP
without any other networking software. For information on how to set up a
Windows computer for Windows printing, see Getting Started. Windows printing
runs via TCP/IP, so TCP/IP must be configured on the DocuColor 40 CP and on
all workstations that use Windows printing.
Use WINS Name Server
Yes/No [No]
Broadcasts from SMB devices cannot be routed without a WINS name server. Setting
up the WINS name server is outside the scope of this manual. To find out if a name
server is available, contact your network administrator.
WINS IP Address
[127.0.01]