Service Setup Options - Xerox DocuColor 40 User Manual

2
2-21 Network Setup options
Exit Service Setup
LPD Setup
PServer Setup
Windows Setup
Service Setup
Web Services Setup
Service Setup
For protocols other than IPX/SPX, the frame type is automatically enabled and does
not require setup, as follows:
With this protocol:
AppleTalk
TCP/IP with Ethernet
TCP/IP with Token Ring

Service Setup options

Network Service Setup has options for TCP/IP and IPX/SPX networks.
• LPD Setup enables lpd printing on TCP/IP networks.
• For IPX/SPX networks, PServer Setup allows you to enter the names of the Novell
objects that are concerned with DocuColor 40 CP print jobs.
• Windows Setup enables the Microsoft SMB (Server Message Block) protocol, which
supports peer-to-peer printing, also known as Windows printing or SMB printing.
• Web Services Setup enables the http protocol and, therefore, use of the WebTools.
PServer is a program in the DocuColor 40 CP that can service the Novell print queues
assigned to the Novell print servers you have set up for printing to the
DocuColor 40 CP. When you choose PServer Setup and enable PServer, you can set
up Novell Directory Services, Bindery Services, or both. NDS is used with NetWare
4.x; Bindery Services are used with NetWare 3.x or with NetWare 4.x in bindery emu-
lation mode.
Due to the number of options involved, PServer Setup is discussed last in this
N :
OTE
section, after Web Services Setup.
And these printing services:
PAP (Printer Access Protocol)
LPD (Line Printer Daemon)
LPD (Line Printer Daemon)
This frame type is
automatically enabled:
Ethernet SNAP
Ethernet II
Token Ring SNAP