Xerox DocuColor 40 User Manual page 81

2
2-45 Administrative functions in the Setup menu
Measure Page
Yes/No [Yes]
Select to measure the colors on the measurement page.
Yes
You are prompted to position the Kodak Gray Scale strip (included in your
DocuColor 40 CP media pack) and the measurement page on the scanner. If you don't
use the Kodak Gray Scale strip, the DocuColor 40 CP performs AutoCal 1, measuring
only the color strips. If you do use the Kodak Gray Scale strip, the DocuColor 40 CP
performs AutoCal 2, which measures the gray tones (to correct for possible drift in the
scanner) as well as the color strips. The scanner scans the page and creates an internal
measurements file.
If you select
played.
Print Comparison Page
Yes/No [Yes]
Specify Yes if you want the DocuColor 40 CP to print a page with two versions of a set
of test images, one version using a calibration based on your most recent measurements
and the selected target, and one with no calibration.
Apply/Overwrite Calibration
Yes/No [Yes]
Choose if you are satisfied with the calibration shown in the comparison page. The
Yes
newest calibration overwrites any previous one.
Choose to return to the main Calibration Setup menu.
No
This affects all users. Continue?
Yes/No [Yes]
This is a reminder that calibration is a global setting; if you overwrite calibration, every
print job is affected by the new calibration.
If you choose
menu. If you are finished, choose
If you choose
tion menu.
No , measurement is skipped and the
, calibration is overwritten and you return to the main Calibration
Yes
Exit Calibration
, calibration is not overwritten, and you return to the main Calibra-
No
Print Comparison Page option is dis-
. The DocuColor 40 CP reboots.