Out Digital Output - Zmotion ZIO Series Manual

→ Wiring Note:
The wiring principle of digital input IN (0-31) is shown in the figure above. The
⚫
external signal source can be an optocoupler, a key switch or a sensor, etc., all can
be connected as long as the requirements on output of electric level can be achieved.
For the public end, please connect the "EGND" port on the IO power supply to the
⚫
"COM" terminal of the external input device. If the signal area power supply of the
external device and the power supply of the controller are in the same power supply
system, this connection also can be omitted.

3.8.4. OUT Digital Output

→ Wiring Definition
Terminal
Note: output 16-23/24-31 are same as output 0-7/8-15.
Name Type
OUT0
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7 NPN type, digital
OUT8 output
OUT9
OUT10
OUT11
OUT12
OUT13
OUT14
OUT15
Function 1
Output 0
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 8
Output 9
Output 10
Output 11
Output 12
Output 13
Output 14
Output 15