Table of Contents
Advertisement
START/STOP
Press MODE to start/stop the clock and the automation
sequences. The automation sequences will start playing
from the beginning when you re-start the clock. Recording
any automation on any channel will re-start the clock if it
was stopped.
NOTE: The CLK light blinks shortly at the beginning of the
automation sequence of the selected channel.
8 RESET
Use the RESET input to reset the automation sequencers
(they go to their beginning = first step). All channels have the
possibility to ignore the reset input and run independently.
Hold SHIFT and press the MUTE button to set the selected
channel to listen to the RESET input (MUTE light ON) or ignore
it (MUTE light OFF).
INPUTS
The straightforward mechanics of Neo Trinity attain vast
complexity with the use of its configurable inputs.
Channels E and F have their dedicated inputs, while the META
IN can affect one or several channels at once in various ways.
See the Patch Tips section to learn the core ideas behind the
individual input modes.
Advertisement
Table of Contents
