Table of Contents
Advertisement
6 MUTE
Hold the MUTE button and press corresponding channel
buttons to mute (light OFF) or unmute (light ON) any channel.
7 CLK CHANNEL
The clock channel controls the module's clock.
Press CLK to enter clock channel settings. Press CLK again or
press any other channel button A/B/C/D/E/F to leave.
CLK OUT sends out the clock Neo Trinity is running on and
indicates it with the nearby light. The output voltage range is
0V to +5V.
CLK IN receives an external clock. The maximum accepted
clock frequency is 50Hz.
If CLK IN is not connected, the module generates its own clock
= INTERNAL CLK MODE.
If CLK IN is connected, the CLK channel acts as a divider/
multiplier = EXTERNAL CLK MODE.
INTERNAL CLK MODE
Turn the RATE knob to select the clock speed.
Hold REC and tap SHIFT to define the TAP Tempo (set the
speed by tapping SHIFT). The final clock will be 4 times
faster, assuming the clock is 16th notes and you are tapping
quarter notes.
120
110
140
100
90
34.5
CLK TEMPO BPM
160
180
420
Advertisement
Table of Contents
