Table of Contents
Advertisement
TIME-QUANTIZED / NON-QUANTIZED
TRIG AUTOMATION
By default, all recorded triggers (or gates) are quantized to the
clock. You can toggle the quantization OFF/ON separately for
each channel.
Hold the channel button A/B/C/D/E/F and press the
CLK button to make the corresponding channel's triggers
QUANTIZED (CLK light ON) or NON-QUANTIZED (CLK
light OFF).
NOTE: "Non-quantized" triggers are technically still quantized,
but the resolution is very high (24x the clock cycle).
TRIGGER ROTATION
You can shift the entire TRIG automation sequence forward or
backward by holding both REC and SHIFT and pressing CLK (+)
or MUTE (-). Each tap represents one step.
REC+SHIFT+CLK(+)
REC+SHIFT+CLK(+)
REC+SHIFT+CLK(+)
REC+SHIFT+MUTE(-)
TRIGGER ROTATION:
Advertisement
Table of Contents
