Table of Contents
Advertisement
Use the RATE knob to set the speed of the LFO. If SYNCed, the
RATE knob sets the divider to the tempo.
SYNC
Hold SHIFT and press CLK to SYNC the LFO to the clock. While
holding SHIFT, the SYNC indicator will light up if the function
is on. Pressing SHIFT and CLK deactivates the SYNC function.
SHAPE
Hold SHIFT and press the channel buttons A, B, C, D, E to
select an LFO shape.
Holding SHIFT, press F for smoothing the selected shapes.
That is especially useful to avoid clicks in the VCAs and other
sensitive modulation destinations.
●
A – saw (smooth saw)
●
B – triangle (sine)
●
C – ramp (smooth ramp)
●
D – pulse (smooth pulse)
●
E – random (interpolated random)
●
F – enables/disables smoothing of shapes above.
F
REGULAR
F
SMOOTH
UNIPOLAR/BIPOLAR
Hold the respective channel button A/B/C/D/E/F and press
the MUTE button to set the selected channel as BIPOLAR
(MUTE light ON) with an amplitude of -5V to +5V or UNIPOLAR
(MUTE light OFF) with an amplitude of 0V to +5V.
5V
0V
-5V
A
B
SAW
TRIANGLE
SINE
C
D
RAMP
PULSE
E
RANDOM
UNIPOLAR
BIPOLAR
Advertisement
Table of Contents
