Table of Contents
Advertisement
9 IN E AND IN F
Channels E and F have their dedicated inputs affecting only
their respective channels.
Hold the channel button E or F and short-press MODE to cycle
through the available INPUT MODES (see below).
Hold the channel button E or F and long-press MODE to disable
the input for the selected channel.
10 META IN
META IN is an input that can affect some, none or all the
channels.
Hold SHIFT and short-press MODE to cycle through the INPUT
MODES for the selected channel.
Hold SHIFT and long-press MODE to DISABLE the META IN
for the selected channel.
NOTE: All the inputs are continuously updated at a rate
of 4kHz (4000 times every second).
Advertisement
Table of Contents
