Table of Contents
Advertisement
Manual
1 CHANNEL OUTPUTS
Use the outputs for modulating CV destinations across your
modular system.
The outputs have a range of -5V to +5V in bipolar mode and 0V
to +5V in unipolar mode. They are updated at a rate of 4kHz
(4000 times per second).
The lights at the outputs indicate the voltage by changing their
intensity and polarity: green = positive, red = negative. The
outputs can be calibrated to match the V/OCT inputs of your
sound sources. See the calibration section for more details.
2 CHANNEL BUTTONS
Press the individual channel buttons to select a channel; the
corresponding letter icon (A/B/C/D/E/F) will light up. All
settings on the module are then applied to the selected channel.
The light under the RATE knob indicates the voltage and polarity
of the output of the currently selected channel.
3 MODES
LFO MODE
LFO MODE is primarily for repeating simple modulation shapes
but with some exciting automation possibilities on top.
0.5s
6, 4, 3, 2, 1, 1/2, 1/3
2.5s
10Hz
16, 12, 8
1/4, 1,6
4m20s
180Hz
256, 128, 64, 32
1/8, 1/16, 1/32
LFO DURATION/FREQUENCY
LFO CLK DIVIDER
Advertisement
Table of Contents
