Page 2
Thanks to the Bastl community for the endless support and constant inspiration through our shared love of synths and music and fun. High fives to Václav Peloušek for adding the digital brain to softPop and for meeting my impossible feature requests in style.
Page 3
50x gain Plugging a cable into the OUT jack (34 dB) for amplifying low-level signals There are three ways to power softPop: disconnects the speaker. (line, piezo, etc.) Output comes directly from the Band jack.
Page 4
ENVELOPE the input of VCF . This is useful if VCO1 has 4 controls: using softPop only as a filter for external audio signals. VCO0 and VCO1 will still be Adjusts the pitch available as modulation signals but will from LFO to audio ranges.
Page 5
• The recorded patterns will be stored in of VCO0. These sequences control the • Playback will be activated and the the memory even after softPop is turned OFF and ON again. pitch of VCO0 and are also available selected pattern LED will turn on.
Page 6
patterns, but for the most part, it - Indicates if the but without removing its analog quirks functions best as a random looping quantizer is on or off. and sassy style. pattern source. • The quantizer must listen to VCO0 before determining if the pitch should •...
Page 7
(A, B or C) located on the back another signal the modulation slider. to the socket to of softPop. This means it is possible to Normalized from the patch up to six signals in and out of the partially override the normalization.
Page 8
• By default, the T&H is gated by VCO1. Triangle wave output. Track&Hold is a circuit that watches of their softPop. If you are new here, T&H SIG <- VCF BP. a modulating voltage (CV or audio), Adjusting the VCO1 modulation slider then leave this section alone and T&H GATE <- VCO1.
• RGB led for psychedelic experience • 25-point patchbay • secret hack chamber at the back for adventurers • built-in speaker • size 15 × 11 × 5 cm WHAT’S IN THE BOX • softPop • Manual • Patchcables set • Poster • Sticker...
Page 11
PRESE PRESETS: FIRS FIRST ENCOUNTER ENCOUNTER...
Page 12
SOFT POPS DRONE SHOWERS *Carefully adujst the feedback knob to the point just before the filter starts to oscillate. * Turn VCO0 fine tune to dive into the drone. *Adjust to make the drone more intense.
Page 13
BABY STEPS FEAR OF THE MAZE * Set the rate with 1 . * Adjust 1 to decide if baby walks forward or backward. *Conquer your fears! *Press button to make baby stand still and adjust *Use VCO1 and VCO1 to talk.
Page 14
DOOM MEMORY GUN *Set and leave until the batteries die * Don’t touch * Nothing matters...
Page 15
PRESE PRESETS: PATCHB TCHBAY EXPLOR XPLORATION...
Page 16
HELLO COMPUTER BURGER TIME * Adjust * It’s burger time. to increase data funkiness.
Page 17
CRITTER PUSH CRITTER PULL **Turn off the PATTERN switch in the SECRET CHAMBER** *Let the critters do their work *Press and hold REC *Slide VCO0 up and down then release REC. *Record a pattern in both pattern locations. *Activate quantizer. *Play with P1 and P2 buttons and FINE control...
Page 18
DRUNK DATA KRISS KROSS *Play with VCO0 and VCO1 faders to make it jump...
Page 20
SPACE EXCHANGE SINK *Switch VCO1 mode to ENVELOPE. *Slide VCO1 up and down to create different syncing sounds. * Tap VCO1 mode button to send a message. *Adjust VCO1 for more chaos.
Page 21
PRESE PRESETS: PLAYING PLAYING WITH O WITH OTHERS...
Page 22
PSYCHIC PSYNC EXTERNAL PROCESSOR *Plug audio signal from drum machine into EXT jack. *Turn ROUTING switches OFF. *Adjust EXT volume until the signal is loud but not distorting. *Adjust EXT volume. Can be driven to distortion. *Play with controls. *Connecting MOD will make VCF modulation nice and smooth.
TIME MASTER TIME SLAVE *Connect VCO1 to master clock input of a drum machine, sequencer, etc via the socket to jack adapter. * Connect clock signal from drum machine to VCO1 sync socket via the jack adapter *Try moving VCO1 fader.
Page 24
PITCH SLAVE MAX BLAST *Connect CV output from keyboard (or any other CV source) to VCO0 CV input via the jack to socket *Set all faders at max. *Press and hold REC button. * Release REC and enjoy the max blast. adapter.
REC. 3. Record a pattern in * For a traditional synth voice, plug the main OUT of the softPop to the input of a voltage controlled both pattern locations. *Tweak the filter for the acid sass. *Adjust VCO1 to get a amplifier (VCA).
Page 26
MIDNIGHT FM *Turn ROUTING switches OFF. *Adjust EXT volume. Amplitude will impact the depth of the envelope from the EF socket as well as the rate of VCO1. *Play with controls.
Page 27
SoftPop is a modular analog noise creature. It is playful, stubborn, rowdy and maybe even a little bit wise. The heart of softPop is a wild tangle of feedback, chaos and an oddly familiar organic personality. There is a great amount of complexity in its...