Table of Contents
Advertisement
CV MODE
CV MODE is designed for recording the knob movements
and creating pitch and gate sequences. It can also serve as
a powerful voltage processing utility.
RATE
Use the RATE knob to set the voltage at the output.
AUTOMATE
Automate the output by holding REC and turning the RATE knob
(press 2x REC to clear the knob automation).
Hold REC and tap or hold SHIFT to record continuous output
gates, instead of trigger events (press 2x SHIFT to clear the
automation).
Hold SHIFT and press or hold REC to perform manual gates
without recording triggers into the automation.
QUANTIZATION
Hold SHIFT and press A, B, C, D channel buttons to control
quantization:
●
D – toggles quantization ON/OFF
●
A – switch between major (light ON) and minor
(light OFF) scale
●
B & C – combinations of these select which kind
of scale is used
TIP: In general, the more A/B/C lights are on, the more notes are
in the scale.
Advertisement
Table of Contents
