VOLTAGE PROCESSOR
●
Set channel F to CV mode
●
Set IN F to regular or inverted mode (F+MODE)
●
Send a signal to IN F
Use the channel F output to create a processed CV. This is
useful if you want to offset a CV with the RATE knob.
If you want to attenuate and offset (convert a bipolar signal to
unipolar), then select regular attenuated mode for IN F.
You can also invert signals by setting IN F to the inverted mode.
Inverted offset conditioning is also possible by combining the
RATE offset and the inverted input mode. This is useful for
ducking/side-chain compression envelopes and such.
L
E
N
G
T
H
+
-
CV