Table of Contents
Advertisement
The surface level operation is super easy:
1
Use the outputs to modulate your other modules.
2
To select a channel press one of the A/B/C/D/E/F channel
buttons.
3
To change a mode of the selected channel press the MODE
button.
4
Use the RATE knob to set the main variable of the selected
channel.
5 AUTOMATE
Each channel has an independent sequencer for automating
its RATE knob and for adding trigger events.
Hold REC and move the RATE knob to record automation.
Hold REC and tap SHIFT to record a trigger into the sequence.
6 CLEAR
Is it doing too much stuff?
REC light indicates that there is an automation present.
Double tap RATE to remove automation of the RATE knob.
Double tap SHIFT to remove all the recorded triggers on the
selected channel.
CHANGE SHAPE
Further you can change the shape or mode-specific settings
by holding SHIFT and pressing the A/B/C/D/E/F buttons
– see the symbols in the silver background on the panel.
Advertisement
Table of Contents
