Commissioning; Use Of The Serial Interface; Switching On The Monitor And Pc - Eizo RadiForce LS560W Instruction Manual

Commissioning

7.1

Use of the serial interface

The monitor must not be serviced in the presence of patients
The monitor must not be serviced in the presence of patients.
The monitor has a serial RS-232 interface with a 6-pin mini-DIN socket. The following units
may be connected to the socket:
● Universal Serial Luminance Meter with 9-pin Sub-D to 6-pin mini-DIN adapter
● Advanced Serial Luminance Meter with 9-pin Sub-D to 6-pin mini-DIN adapter
● Serial Spot Meter with 9-pin Sub-D to 6-pin mini-DIN adapter
7.2

Switching on the monitor and PC

The monitor and PC can be switched on in any order.
Requirement
The PC and monitor are connected via DVI cables.
For best results, the graphics card and driver should support the DDC channel.
Switch on monitor before PC
1. Switching on the monitor.
The operation LED lights up yellow.
2. Switch on the PC.
If the connected signal can be displayed on the monitor, the operation LED will light
green.
RadiForce® LS560W
Instruction Manual, 04/2012, A5E10000920A-006
CAUTION
7
31