Appendix
A.1
Guidance and manufacturer's declaration – electromagnetic
emissions
The monitor RadiForce® LS560W is intended for use in the environment specified below.
The customer or the user of the monitor should ensure that it is used in such an
environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions IEC 61000-3-3
See also
Electromagnetic compatibility (Page 44)
General safety notes (Page 8)
RadiForce® LS560W
Instruction Manual, 04/2012, A5E10000920A-006
Compliance
Group 1
Class A
Class A
Complies
A
Electromagnetic environment –
guidance
The monitor RadiForce®
LS560W uses RF energy only
for its internal functions.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in
nearby electronic equipment.
The RadiForce® LS560W
monitor is not suitable for use in
domestic establishments and
establishments directly
connected to the public low-
voltage power supply network
that also supplies buildings used
for domestic purposes.
47