Medical Subsystem - Eizo RadiForce LS560W Instruction Manual

Description

3.3 Medical subsystem

Uniformity compensation
In order to achieve a uniform distribution of luminance, the RadiForce® LS560W monitor is
provided with electronics for luminance correction. This electronics is calibrated in the
factory.
Settings for optimizing the application
The monitor can be adapted to the local lighting conditions at the click of a mouse using the
five preset practice-oriented Look Up Tables.
3.3 Medical subsystem
CAUTION
Use only trained and qualified personnel
The device may only be used by trained and qualified personnel.
The RadiForce® LS560W monitor can be part of a medical subsystem comprising the
following components:
Mandatory Devices
1. Large Monitor LS560W
2. LMM56800 Large Monitor Manager
Accessories and Optional Devices
1. Analog-DVI Converter PDC0100
2. DVI Splitter/Scaler PDS0800
3. DVI Transmission Link TDL3600
4. Control Interface Device CID1000P
5. Front frame with protective glass for protection against mechanical damage.
Detailed information on the individual parts of the medical subsystem can be obtained from
the instruction manual of the respective components.
The RadiForce® LS560W is intended to be used by health care professionals to integrate
the video output from various commercially-available instruments commonly used in a
medical procedure laboratory into a single video monitor.
The RadiForce® LS560W can replace up to eight single 1 mega pixel monitors used with
modalities in ceiling suspension units.
This modality application requires monitors with internal factory preset Look Up Tables in
order to adapt the monitors to the human visual system. These 1 mega pixel monitors need
not be calibrated on site.
The 8 mega pixel monitor RadiForce® LS560W offers five factory preset internal Look up
Tables.
16
RadiForce® LS560W
Instruction Manual, 04/2012, A5E10000920A-006