Important Features - Eizo RadiForce LS560W Instruction Manual

3.2

Important features

The monitor has the following features which permit a wide range of applications:
Large 56" picture diagonal
With a picture diagonal of 56" and a resolution of 3840 x 2160 pixels, the monitor is suitable
for simultaneous use of several image sources. Particularly when used together with the
LMM56800 Large Monitor Manager, the monitor can be used highly flexibly for various
applications, e.g. angiography, EP, cardiology applications.
Perfect picture reproduction thanks to LCD technology
Distortions in the image geometry do not occur with LCD technology.
The Color Flat Panel Monitor provides a flicker-free picture even with low refresh rates. This
monitor thus fulfills even the strictest ergonomic requirements.
The Color Flat Panel Monitor has a TFT monitor module with a very wide viewing angle. The
use of state-of-the-art LCD technology allows a high luminance.
Fully Automated Stability
The Color Flat Panel Monitor is equipped with an automated stability system (Fully
Automated Stability) in accordance with the DICOM standard. The integrated stability system
(ISS) ensures consistent luminance levels using an integral light sensor in the center of the
backlight.
The monitor is precalibrated at the factory. It is supplied from factory with a total of five
defined Look Up Tables. The saved calibration data simplify installation and servicing: Even
if the graphics card or workstation is replaced, e.g. during upgrade, the graphics settings are
retained and there is no need to recalibrate the monitor.
Increased failure safety
Great attention was applied to increased failure safety in the electronic design of the monitor.
Two independent circuits have been used for the backlight power supply, and a partial image
is still displayed should one video channel fail.
Communication interface
The operating states of the monitor can be read via the communication interface which is
connected via the DVI port: The monitor can be set to a Power Safe Mode. In particular the
operating capability of the monitor can be scanned via this interface.
RadiForce® LS560W
Instruction Manual, 04/2012, A5E10000920A-006
Description
3.2 Important features
15