Table of Contents
Advertisement
6.5
Description of connection procedure
Requirement
Device must already be mounted at the location of use.
Connecting
1. Loosen combo torx-slotted screw on the connector panel.
2. Remove the cover from the connector panel.
3. Connect the appliance plug to the monitor's power connector.
4. Secure appliance cable with tie to the provided lug to prevent unintentional loosening
(marked with a red circle).
5. Connect DVI cables directly to the DVI sockets. Only Dual Link DVI cables with a
correspondingly high quality may be used.
RadiForce® LS560W
Instruction Manual, 04/2012, A5E10000920A-006
6.5 Description of connection procedure
Connecting
29
Advertisement
Table of Contents
