Operation
8.1
Switching on the monitor and PC
Once installed, operating the display consists mainly of switching the power on and off.
After switching on the display, the operation LED is lit green continuously. If the LED lights
up with another color, the device is not operating within normal parameters.
See also
Troubleshooting (Page 39)
8.2
Measures in the event of an error
Should the display not function correctly, EIZO recommends checking all basic connections
and possible operation errors before contacting service personnel.
See also
Troubleshooting (Page 39)
RadiForce® LS560W
Instruction Manual, 04/2012, A5E10000920A-006
8
35