Table of Contents
Advertisement
6.3
Power supply connection
Only connect device to a supply mains with a PE conductor
WARNING: WARNING: To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
CAUTION
Only use the power cable supplied with the display, or a cable with a PE conductor and an
appliance socket in accordance with DIN 49 547, IEC 320 (max. length 3 m, cable e.g.
H05VV-F 3x1.0 mm²). Furthermore, the cable must adhere to all local safety regulations
applicable to the specific country in which the display is used.
Information for installations in the USA and Canada
Molded power supply plugs must comply with the requirements for "hospital grade
attachments" CSA Std. C22.2 No. 21 and UL 498.
Note for installations in China
Power cables, power supply plugs and appliance plugs must be CCC-certified.
The monitor's power supply is connected using an appliance plug.
● Check the permissible power supply range before connecting the monitor.
See also
General safety notes (Page 8)
Connector locations (Page 25)
Power supply (Page 41)
RadiForce® LS560W
Instruction Manual, 04/2012, A5E10000920A-006
DANGER
Connecting
6.3 Power supply connection
27
Advertisement
Table of Contents
