Fuel Bed Layout & Log Positioning - bemodern PRIZM MEDIAVUE Instructions For Installation & Operation

Fuel Bed Layout & Log Positioning
For instructions on how to dress the fuel bed please follow P24 & P25 here, for the Standard Arteon Log and Fuel
bed option pack supplied inside the fire or the separate instruction supplied with the Arteon Enhanced Split Logs
and Fuel Bed option pack.
Note: Reference the separate Fire installation instruction for the Fire installation, setup and operation.
Diagram 45
Fuel Bed Dressing- As a starting point follow the example below:
Diagram 17
Diagram 46- Place a large amount of crystals in the centre of the fuel bed- leaving a gap around the edges.
Tip:
The crystals pick up light from the under bed lights to give you a realistic glowing ember effect, so we recommend using a
generous amount.
Diagram 47- Fill the space around the edges of the crystals with the pebbles, as well as randomly in between the
crystals.
Diagram 48 Add the bark and/or the grey slate sparingly and randomly across the top of the crystals and pebbles.
-
Finally arrange the logs on top.
Tip:
Before dressing the fuel bed- position the previously
removed glass bracket in the channel in the base of the fire,
this will help to stop the smaller fuel bed material falling into
the channel during installation.
See Diagram 45.
The dressing of the fuel bed can be fully tailored to the
customers individual tastes. A sufficient amount of each
fuel bed finishing material has been provided to cover the
fuel bed in a single type of material.
200860_01
24