Preparing the operating device
Introduction
Removing
side panels
11- 2016
Maintenance
Intervention on the FK3- 4 operating device
In order to perform certain maintenance operations inside the operating
device it is necessary to remove some cabinet parts.
The table below gives the steps of side panels removing :
Step
Action
1
Remove the nuts (2) from
the left side panel (3).
2
Take hold of the left side
panel (3) from underneath,
pull slightly towards the out-
side, then downwards to
remove it.
3
Proceed in the same way
for the right side panel.
GE Information
Diagram
x 2
2
M8
3
L51- 303EN/05
3
4/10