GE SF6 Instruction Manual page 65

Frame- support assembly, continued
Process, continued
01- 2017
Installation
Supporting frame assembly
The table below gives the steps of installing the supports of the frame:
Step
4 With the aid of two flexible lifting straps, position the frame- support
(3) onto the housing (10) and fasten it with the use of the screws (7)
and NORDLOCK washers (9). Do not tighten the screws (7).
With the aid of two flexible lifting straps, position the frame- support
5
(2) onto the housing (10) and fasten it with the use of the screws (7)
and NORDLOCK washers (9). Do not tighten the screws (7).
6 Install the strengthening piece (22) inside the frame- support (3) with
the use of the screws (20). Adjust the distance between the support
and fasten the strengthening piece on the frame- support (2). Do not
tighten the screws (20).
2
22
GE Information
Action
3
2x2
2
H M16-35
x 2
20
H M16-45
3
10
9
2x2
7
H M16-35
10
9
7
Continued on next page.
L31- 139EN/03
7/10