GE SF6 Instruction Manual page 277

Final coupling, continued
Removing the
chamber transport
cover
11- 2016
Installation
Coupling of column and chambers
The table below shows the steps for removing the chamber transport cover:
Step Action
1 Remove the fixings (40) and
insert the lever (32) through
the bracket rings (7).
Pull on the lever (32) to open
the cover (4).
Hold on two two of the cover
bolts (40) for later use.
2 Start timing.
(The final chamber/column
coupling operations should
be completed in a time of
 40 min).
3 Pull off the cover (4) to free
the stop ring (8) and 'Rilsan'
collar (9).
4 Using wire
through the 'Rilsan' collar (9)
holding the connector tube
and remove it.
5 Using the coupling tool (35),
remove the tube (10) and sep-
arate the cover (4) from the
stop ring (8).
GE Information
x 8
40
H M16- 55
32
9
cutters, cut
9
10
4
Illustration
4
7
8
4
8
35
Continued on next page.
L31- 7138EN/02
7/16