GE SF6 Instruction Manual page 78

Final coupling, continued
Removing the
chamber transport
cover
11- 2016
Installation
Coupling of column and chambers
The table below shows the steps for removing the chamber transport cover:
Step Action
5 Using wire
through the 'Rilsan' collar (9)
holding the connector tube
and remove it.
6 Using the coupling tool (35),
remove the tube (10) and sep-
arate the cover (4) from the
stop ring (8).
7 Fit the trolley stop (34) and fix
in place using the bolts (40)
recovered from the transport
cover, hand tightening them.
8 Prepare the fitting tool (35)
by screwing the coupling pin
(24) onto its end, hand tight-
ening.
GE Information
cutters, cut
9
10
34
x 2
H M16- 55
35
Illustration
4
35
8
40
24
Continued on next page.
L31- 7137EN/02
10/18