Eastwood VERSA-CUT Assembly And Operating Instructions Manual page 32

F6 - ZOOM IN
• The zoom function is useful to get a close look at small features. F4 Zoom Out and F5 Zoom In control the zoom level. F6 Return returns to the main cut
screen. F7 Info shows info about the cut file.
F7 - MANUAL MOVEMENT
• The manual movement menu (FIG 42) is useful for cutting manually using the PIERCE button, and alignment before making a cut. The options are de-
scribed below.
• F1 MDI Automatically moves the torch by the distance input for the X and Y-Axes.
• F2 StepMov switches into step movement mode. This asks you to set a distance and will move the Plasma Torch by that distance in the direction of the
arrow key you press. Helpful for precisely aligning with a plate.
• F3 Zero can then be used to manually zero the coordinate system so you know you have the alignment you want. The machine also automatically zeroes
when a fresh cut is started.
• F4 Return Can be used to zero the machine to the current point or zero it to a new point.
• F5 High Spd cycles through three predefined speed levels High Spd, Mid Spd, Low Spd.
• F6 Recover Can recover the torch to a point on your cut file or offset the cut file.
• F7 Frame will run the Torch in a rectangular circuit at the min./max. X and Y values of the cut file. Very useful for understanding if you have enough space
to cut a complicated part which would take a long time run a demo on.
FIG. 42
32
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com