Eastwood VERSA-CUT Assembly And Operating Instructions Manual page 11

• Install the X-Axis Gantry Beam Assembly [W] with the hardware pre-installed to the Y-Axis Gantry Assemblies (FIG 7).
FIG. 7
• Install the cables at both sides (FIG 8). Note that all the connections are unique and cannot be installed incorrectly. Line the connector up with the keyed
entryway, then insert and rotate the lock collar half a turn to secure. The Y-Axis Gantry Cable will be connected later.
FIG. 8a
To order parts and supplies: 800.343.9353 >> eastwood.com
Install
Torch Height Motor Assembly
Mount Bracket
Crossover
Cable connector
Limit Switch
connector
FIG. 8b
X-Axis and Torch
" " " "   
Height Motor Cable
connector
" " " "   
X-Axis Limit Switch
Cable connector
Install
Crossover
Cable
connector
X-Axis Gantry
Cable connector
11