Physical Controls - Eastwood VERSA-CUT Assembly And Operating Instructions Manual

PHYSICAL CONTROLS

The CNC Cut Controller has a color 7" LCD display and 45 keys. The Power Switch and Emergency
Stop (FIG 26) control power to the Cut Controller. Pressing the Emergency Stop button will imme-
diately cut power, halting cutting and movement operations, until it is rotated clockwise to restore
power. The main control clusters for the CNC Cut Controller are highlighted in (FIG 27).
A LCD screen used to monitor and navigate.
B Main function keys used for accessing/exiting menus and altering settings quickly. The func-
tion of these keys will be shown at the bottom of the LCD screen. Key F7, along with
commonly used to confirm a change or select continue. ESC can be used to exit any screen and
pressing it multiple times will get you back to the main screen if needed.
C USB connection for importing and exporting files via USB drive. The small arrow button to the
left of the port is only used for software updates.
D Manual controls for cutting functions. Since this table is configured as a CNC Plasma Table,
only PIERCE and OFF are used for manual operations.
E The arrows manually jog the Plasma Torch position and are used in menu navigation. The Torch
Height Motor can be triggered manually by the S and S keys. Easily alter the torch cutting
speed with the F and F keys. Single taps will adjust it by one and holding for several seconds
will progressively scale by factors of ten.
F Machine Start/Stop controls. To start a program press
0
pressing and resume by pressing
resume a cut.
G This button cluster is used to quick access select settings for altering without having to go into
the settings menus.
H Number and letter keypad is mostly used for setting entry and file naming. SHIFT is a modifier
key that when pressed toggles the letter/number combo keys to the alternate character. Before
each time an alternate character is entered SHIFT will need to be pressed again.
FIG. 27
A
B
20
I
followed by
I
. Note, confirmation will not be asked for when starting to
FIG. 26
, are
to confirm. Stop by
E
F
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Power Switch
Emergency Stop Button
H G
C
H
E
D