Eastwood VERSA-CUT Assembly And Operating Instructions Manual page 24

F2 - FILES
• F2 opens the file browser (FIG 34) where G-code is stored to the machine, or a USB drive. Files can be searched, edited, deleted, copied, previewed,
saved, and renamed here. The maximum USB drive size supported is 16GB , and the USB drive must be formatted to FAT or FAT32 file system.
• Use the arrow keys and
or F7 on a G-code file will open it from the USB Drive. Do not remove the USB Drive before you finish using the part because it is not saved to
• Pressing
the machine and will not reload correctly.
FIG. 34
24
button to navigate a file directory.
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com