All manuals and user guides at all-guides.com The EASTWOOD METAL HAND PUNCH is specifically designed for the DIY Fabricator. It features a maximum punching pressure of 1.2 tons and is capable of punching a 1/8” hole in up to 16 gauge mild steel.
• To prevent a pinch hazard, do not place hands between lever and punch body. PROJECTILE HAZARD! • Frequently inspect cutting dies. If cracks or chips develop, discontinue tool use immediately. To order parts and supplies: 800.345.1178 >> eastwood.com...
1. Insert Upper Die through the Body of the tool. 2. Install Upper Die Set Screw. 3. Use included Key to Install Lower Die. Thread Die into tool until it stops. 4. Install Lower Die Set Screw. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
• After each use, clean tool of any debris and inspect punching dies for damage. • Apply a thin coat of machine oil on all un-painted surfaces to prevent corrosion and maximize performance. • Store in a clean, dry environment. To order parts and supplies: 800.345.1178 >> eastwood.com...
Tool Will Not not Threaded In Fully thread Lower Die into the body of the tool. Punch Hole All the Way Upper and Lower Die Size Match Upper and Lower Die sizes. Do Not Match Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
Page 7
All manuals and user guides at all-guides.com To order parts and supplies: 800.345.1178 >> eastwood.com...
Throatless Bench Shear If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/20646manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178 Outside US: 610.718.8335...