Table of Contents
Advertisement
• Reinstall the Mount Bracket to the X-Axis Gantry and plug in the motor
connector (FIG 12).
• Install the Control Panel Mount Arm [X] to the front right Leg, with the
pre-installed hardware (FIG 13).
• Mount the Cut Controller Box with Hardware installed [H] to the Mount
Arm with the pre-installed hardware (FIG 14).
To order parts and supplies: 800.343.9353 >> eastwood.com
""""
""""
""""
""""
FIG. 12
FIG. 13
Install
FIG. 14
Install
Hidden from view
"
"
"
"
"
"
"
"
Install
Hidden from view
"
"
"
Install
13
"
"
"
"
"
Advertisement
Table of Contents
