Eastwood 21489 Instructions Manual

Eastwood 21489 Instructions Manual

Deep jaw shrinker stretcher

Advertisement

Quick Links

Item #21489
DEEP JAW
SHRINKER STRETCHER
INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 21489 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eastwood 21489

  • Page 1 Item #21489 DEEP JAW SHRINKER STRETCHER INSTRUCTIONS...
  • Page 2 The EASTWOOD ELITE DEEP JAW SHRINKER STRETCHER is designed for heavy-duty commercial use and features an extra-deep, 7” throat depth and wider jaws to allow working larger pieces and panels. INCLUDES (1) Body (with Shrinker Jaws installed) [A] (1) Upper Stretcher Jaw [B] (1) Lower Stretcher Jaw [C]  """"...
  • Page 3 To avoid injury, stop work immediately and inspect workpiece material for nicks, dents, welds, excessive scale or remaining coatings. Clean or repair as necessary or discard and begin with a new piece. Also inspect Shrinker Stretcher components for looseness or damage. To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 4 SET-UP FIG. 1 • The optionally available Eastwood Elite Deep Jaw Shrinker Stretcher Stand (#21491) is strongly suggested for mounting the Shrinker Stretcher. See Eastwood Elite Deep Jaw Shrinker Stretcher Stand instruction manual for stand mounting. • As an alternative, a sturdy, well anchored workbench with a mini- mum 3/16”...
  • Page 5 • Slide Upper Jaws onto Body with screw slots located under Cap Screws and Washers. • Place Wire Bail over top of Actuating Bar. • Tighten Upper Jaw Cap Screws with a 4mm Hex Key (not included). FIG. 6 To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 6 • Before fabricating with the Shrinker Stretcher, pre-bend the metal to be formed to a 90˚ angle along its length on a sheet metal brake (The #14042 Eastwood Versa Bend 20 Inch Offset Sheet Metal Brake works well), creating FIG. 9 a maximum flange depth that is no greater than 7”...
  • Page 7 • Check tightness of all hardware. • Check operation for binding. Lubricate sliding parts and pivot points periodically with medium bodied oil. NOTE: Use care to avoid getting oil on Jaw Gripping Teeth. To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 8 Eastwood 24” Slip Roll If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/21489manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.343.9353...

Table of Contents