11
3. Position the gear unit B on the hole J using the
bushing G to centre.
4. Secure the gear B using the screw A inserting the
washer H (tightening torque at see service letter
700019 - 700021).
11.6 3rd PTO (replacement)
Fig 11.12
Important
•
Before proceeding with operation, read
3.3.2.
11.6.1 Disassembly
1. Undo the screws A and remove the pump B.
EN
152
INFORMATION ABOUT OPTIONAL
COMPONENTS
Par.
Fig 11.13