Kohler KDI 1903M Workshop Manual page 62

6
2. Disassemble the starter motor.
3. Mount the tool
starter motor Y and fit it with the two starter
motor fixing screws.
4. Rotate the crankshaft clockwise
bringing reference X upwards.
NOTE: During the positioning phase of reference X,
check that cylinder N° 1 is in compression phase
(intake and exhaust valves of cylinder N° 1 must be
in closing position).
Fig 6.10
Tab. 6.1
PUMP CODE
ED0065900040-S
ED0065900060-S
ED0065900310-S
ED0065905050-S
ED0065905110-S
ED0065905150-S
ED0065905160-S
ED0065905170-S
ED0065905180-S
ED0065905350-S
ED0065905380-S
ED0065905410-S
ED0065905470-S
ED0065905500-S
ED0065905510-S
ED0065905540-S
ED0065905640-S
ED0065905650-S
ED0065905660-S
ED0065905670-S
EN 62
INFORMATION FOR REPLACING THE
FUNCTIONAL UNITS
ST_34
in the seat of the
ST_34
ADVANCE
PISTON
α
LOWERING (mm)
1,695 13°
3,591 19°
0,815 9°
1,695 13°
1,963 14°
1,695 13°
1,695 13°
1,695 13°
1,695 13°
1,963 14°
3,228 18°
2,558 16°
1,695 13°
1,695 13°
1,695 13°
1,006 10°
1,695 13°
1,695 13°
1,695 13°
1,695 13°
tool