Kohler KDI 1903M Workshop Manual page 91

INFORMATION FOR DISASSEMBLY
4 CYLINDERS
1. Undo capscrews E and F by following the order
indicated in the figure.
2. Remove the lower semi-crankcase D and store it in
a suitable container for washing.
7.13.4 Crankshaft
Remove:
1. Crankshaft G.
2. The four shoulder semi-rings H.
7.13.5 Piston ( )
1. Remove the retainer ring N.
2. Remove the pin P to separate the piston Q from the
connecting rod R.
Important
•
If they are not replaced, keep the components
together (connecting rod - piston - gudgeon pin) by
using references in order to prevent them from
getting mixed up during assembly.
4 Cylinders
Fig 7.50
Fig 7.51
Fig 7.52
7
91
EN