Information For Replacing The Functional Units; Injectors And Injection Pump Replacement - Kohler KDI 1903M Workshop Manual
Hide thumbs
Also See for KDI 1903M:
- Owner's manual (50 pages) ,
- Use and maintenance (42 pages) ,
- Owner's manual (38 pages)
Table of Contents
Advertisement
6
6 INFORMATION FOR REPLACING THE
FUNCTIONAL UNITS
6.1 Injectors and injection pump replacement
Important
•
Before proceeding with operation, read
3.3.2.
•
Replace the high pressure pipes after two
disassemblies.
•
Always replace the gaskets after each
disassembly.
•
Handle the components as described in
2.17.
•
Please referring to
the operating references during disassemble
and assemble procedures.
•
When repaired, RSN-A injectors must be
certified by a Stanadyne centre to check their
correct operation - check the type of engine
mounted injectors on the spare parts list (RSN-
A is specified in the description).
6.1.1injection fuel pump disassembly (injection
pump/injectors)
1. Undo the screws A and remove plate B.
2. Remove the retainers C for the hoses D.
3. Undo the nuts F.
4. Undo the nuts E.
5. Remove the tube D.
EN
60
INFORMATION FOR REPLACING THE
FUNCTIONAL UNITS
Par.
Par.
Par. 2.9.7
in order to see
Fig 6.1
Fig 6.2
Fig 6.3
Advertisement
Table of Contents
