Kohler KDI 1903M Workshop Manual page 77

INFORMATION FOR DISASSEMBLY
•
The belt must always be replaced every time it is
disassembled, even if it has not reached the
scheduled hours for replacement
4. Undo the screws C and D and remove the
alternator E.
7.2.4 Sensors and switches
Important
•
After disassembly, protect the sensors suitably
against knocks, dampness and any high
temperature sources.
•
The sensors and switches cannot be repaired,
therefore they must be replaced in the event of
anomalies.
7.2.4.1 Oil pressure switch disassembly (
1. Unscrew and remove oil pressure switch H.
7.2.4.2 Coolant temperature sensor (
1. Unscrew and remove the sensor L.
)
Fig 7.3
)
Fig 7.4
7
77
EN