Kohler KDI 1903M Workshop Manual page 66
Hide thumbs
Also See for KDI 1903M:
- Owner's manual (50 pages) ,
- Use and maintenance (42 pages) ,
- Owner's manual (38 pages)
Table of Contents
Advertisement
6
Assemble the parts P, Q, R and fit the parts so
3.
assembled on the injector Z.
4.
Insert tool
(detail X1).
5.
Tighten the screw P (tightening torque to 20
Nm)
NOTE: Click on the right to play the procedure.
6.1.8 Assembly of the injector return pipes
1. Position the tube N on the injectors Z, and
tighten screws M (tightening torque to 14
Nm).
6.1.9 Assembly Rocker arm cover
Important
•
The gasket AM between the rocker arm
cover and the cylinder head must always be
replaced every time it is disassembled.
1. Position the two guide pins
mounting the rocker arm cover.
2. Position the gasket AM on the head AL
respecting the fastening screw holes L.
3. Attach the rocker arm cover C on the head
AL with the screw L adhering to the
tightening sequence shown in F ig. 6.27
EN
66
INFORMATION FOR REPLACING THE
FUNCTIONAL UNITS
ST_51
on the injectors junctions Z
ST_17
Fig 6.22
Fig 6.23
https://www.youtube.com/embed/Kcv-
_3Edask?rel=0
Fig 6.24
Fig 6.25
before
Advertisement
Table of Contents
