Bowers & Wilkins 704 S2 Series Service – Technical Manual page 25

Hide thumbs Also See for 704 S2 Series:

Table of Contents

LF Crossover Removal

With the Bass Units and Terminal Tray/ Port

removed you have clear access to the

Crossovers. To remove the LF Crossover you

need to begin by unscrewing 4 x screws (1-4).

With the screws removed the Crossover is now

detached from the cabinet.

Reassembling the LF Crossover

Please work backwards through the LF Crossover Removal process ensuring all the

below points.

•

Cables are returned to Correct position. (LF1 & LF2)

•

The Crossover is screwed into its original position using the existing holes.

•

Wadding is positioned back in the cabinet.

Once this is complete, follow the Reassembling the Bass process on Page 21 and

Reassembling the Terminal Tray/ Port process on Page 23 to return the 704 Series 2

to a complete state.

The contents of this document and associated files contain confidential information that is propriety to B&W

Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use

by service technicians familiar with electronic products. No part of the contents should be supplied or published

elsewhere.

Page 25

Table of Contents