Bowers & Wilkins 704 S2 Series Service – Technical Manual page 27

All cables should now be free. To remove the HF/ MF Crossover from the cabinet you need
to unscrew 4 x screws (1-4).
With the 4 x screws removed you can fully remove the HF/ MF Crossover.
Reassembling the HF/ MF Crossover
Please work backwards through the HF/ MF Crossover Removal process ensuring all the
below points.
•
The Crossover is screwed into its original position using the existing holes.
•
The Bung is fitted securely into the cabinet.
•
Wadding is positioned back in the cabinet.
Once this is complete, follow the Reassembling the Bass process on Page 21 , Reassembling
the Tweeter process on Page 14 and Reassembling the Terminal Tray/ Port process on Page
23 to return the 704 Series 2 to a complete state.
The contents of this document and associated files contain confidential information that is propriety to B&W
Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use
by service technicians familiar with electronic products. No part of the contents should be supplied or published
elsewhere.
Page 27
4
3
1
2
© B&W Group Ltd 2017