Bowers & Wilkins 704 S2 Series Service – Technical Manual page 14

Hide thumbs Also See for 704 S2 Series:

Table of Contents

With the Plastic Retainer (1) removed you are able to use the magnetic side of

Tool 1.5 – MM09989 HF Trim Removal Tool to gently lift the Tweeter Grille (2) from the

Tweeter Assembly (3)

IMPORTANT: Ensure you do not touch the Tweeter when removing the Grille as this will

mark or damage the Tweeter. This cannot be rectified without replacement.

Reassembling the Tweeter

Please work backwards through the Tweeter Disassembly process ensuring all the below

points:

•

Gaskets are correctly positioned and not damaged

•

All screws are tightened

•

Cables and tweeter are orientated correctly (Red Paint – Red Cable,)

•

Tweeter Trim is correctly positioned with arrow and single plastic peg at the top

The contents of this document and associated files contain confidential information that is propriety to B&W

Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use

by service technicians familiar with electronic products. No part of the contents should be supplied or published

elsewhere.

Page 14

Table of Contents