Bowers & Wilkins 704 S2 Series Service – Technical Manual page 21

Hide thumbs Also See for 704 S2 Series:

Table of Contents

Disconnect the Green (-) and Yellow (+) Cable connectors to fully remove the Bass Unit. En-

sure not to damage the Gasket when removing the Bass Unit.

Note: The Green (-) and Yellow (+) Cables have different sized connectors to ensure correct

positions when reassembling. (Green (-) Smaller & Yellow (+) Larger)

Reassembling the Bass

Please work backwards through the Bass Removal process ensuring all the below points.

•

The Gasket is correctly positioned and not damaged

•

Green (-) and Yellow (+) cables are fitted securely and correctly

•

All screws are tightened

The contents of this document and associated files contain confidential information that is propriety to B&W

Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use

by service technicians familiar with electronic products. No part of the contents should be supplied or published

elsewhere.

Page 21

Table of Contents