Bowers & Wilkins 704 S2 Series Service – Technical Manual page 26

Hide thumbs Also See for 704 S2 Series:

Table of Contents

HF/MF Crossover Removal

With the Bass Units and Terminal Tray/ Port removed you have clear access to the

Crossovers. To remove the HF / MF Crossover you also need to remove the Mid Unit and

Tweeter.

To remove the Mid unit please follow the 4. Mid Removal process which begins on Page 15.

To remove the Tweeter please follow the 4. Mid Removal process which begins on Page 15.

Now the Mid Unit and Tweeter are removed you are able to pull the Rubber Bung (1)

through the cabinet. This frees the HF and MF cables.

Minimal force is needed to pull the bung through the cabinet.

Note: The cables do not need to be removed from the bung

The contents of this document and associated files contain confidential information that is propriety to B&W

Group Ltd., and are intended solely for the purpose of servicing the product. The information is intended for use

by service technicians familiar with electronic products. No part of the contents should be supplied or published

elsewhere.

Page 26

Table of Contents