Kärcher B 300 RI BP Manual page 70

9.8.4 Clean the waste water tank
9.8.5 Clean the fresh water reservoir
2
70
1
EN
1 Dirt water discharge hose
2 waste water tank
3 Signal transmitter
Switches off the suction turbine when the waste water
tank is filled
4 Lock
5 Cover waste water tank
Clean the waste water tank after completion of work.

Before cleaning, empty the waste water tank, see

Chapter "Wet cleaning | Emptying the waste water
tank".
1 Safety support
2 waste water tank
3 Dirt water discharge hose
4 Cleaning flap
Open for cleaning
For thorough cleaning, open the cleaning flap.

Spray out the interior of the waste water tank using the

water spraying unit or a water hose.
After cleaning, check the function of the signal genera-

tor.
1 Fresh water tank
2 Fresh water tank cover
3 Filling level display
4 Drainage hose for fresh water
Flush out the fresh water tank with clear water after fin-

ishing work.
Empty residual water through the drain hose.

32
-